Prime Intense – The Primer Most People Use
All coating systems start with the first coat. Usually a primer coat is applied first followed by two coats of a hard-wearing top coat.
Timbers such as Blackbutt, Stringybark & Tallowwood require extra care. For these timbers Bona has supplied a special primer. This is called Bona Prime Intense.
Prime Intense is a Primer coat suitable for most of the local Australian Timbers, not simply those mentioned previously. You will see that this coating brings out the colour of the timber yet does not darken the floor significantly.
Timbers such as Blackbutt, Stringybark & Tallowwood require extra care. For these timbers Bona has supplied a special primer. This is called Bona Prime Intense.
Prime Intense is a Primer coat suitable for most of the local Australian Timbers, not simply those mentioned previously. You will see that this coating brings out the colour of the timber yet does not darken the floor significantly.
Applied at a rate of 8-10m2 per litre, a heavy coat is applied using a purpose designed Bona roller. Leave this surface for 3.5 – 4 hours and you are ready to apply the top coat.